Thesis/Dissertation Repository Karachi Campus: Recent submissions

  • HYBRID ALTERNATE ENERGY SOURCE POWER GENERATION AND DISTRIBUTION SYSTEM 
    Ahmed, Syed Rehan Reg # 22909; Shoaib, M. Shahzar Reg # 22868; Sheikh, Shahrukh Ahmed Reg # 22902 (Bahria University Karachi Campus, 2014-09)
    As the world nowadays facing great deal regarding power generation so there are many systems have developed to fulfill the power requirement mostly hybrid systems like: • Wind Solar Hybrids. • Solar Fuel Hybrids. • ...
  • PLC Based Smart Elevator Control System 
    Abbasi, Muhammad Inam Reg # 22862; Nawaz, Naveed Reg # 22889; Khan, Amal Ahmed Reg # 22818 (Bahria University Karachi Campus, 2014-09)
    Regardless of the way that essentially elevators will be not controlled by PLC, still we utilized it, on the grounds that lift will be a fitting framework where we can investigate a part of gimmicks of the PLC. The goal ...
  • BUILDING MANAGEMENT SYSTEM THROUGH INTERNET (TCP/IP) AND WIRELESS MODULE By 
    Shaikh, Hasan Hameed Reg # 19265; Zaidi, Syed Hadi Hasan Reg # 19338; Raza, Syed Muzammil Reg # 19306 (Bahria University Karachi Campus, 2013)
    In today's world human is becoming more and more dependent on machines. So no one wants to be depending on a machine which is not intelligent and efficient. On the other hand people are inattentive when switching off ...
  • Hand Controlled Robot 
    Majeed, M. Zeeshan Reg # 22845 (Bahria University Karachi Campus, 2014-09)
    The name of our project is hand controller robot. Our project is divided in two main parts the glove part and the main robotic platform. The Robot is a 4-Wheel Drive Differential Drive, i.e. for turning, the robot will ...
  • "TE SPACE” SOLAR POWER GENERATION AND MOTOR CONTROL 
    Khan, Muhammad Anas Rag # 19209; Ahmed, Muhammad Shamaiel Reg # 19360 (Bahria University Karachi Campus, 2013)
    The basic objective of Solar powered car prototype is to test a safe and reliable self-driven vehicle which is fully powered, autonomous to some extent, packed and precisely designed to accommodate self-needs of the cars ...
  • VEHICLE IDENTIFICATION MONITORING AND CONTROLLING SYSTEM (VIMS) 
    Asif, Inbassat Reg # 22837; Zehra, Syeda Mustujab Reg # 22912; Nazar, Sadaf Reg # 22892 (Bahria University Karachi Campus, 2014-09)
    VIMS is basically a complete vehicle tracking solution which provides all the feature which a user need for the safety and security of vehicle. It enables user to monitor and control the car. User can easily jam, locate, ...
  • Home Automation by Speech Recognition 
    Younis, Saad Ali Reg # 22892; Javed, Immad Reg # 22835; Karim, Usman Reg # 22914 (Bahria University Karachi Campus, 2014-09)
    In today’s world, there is massive improvement in speech recognition technology and wireless communications. Such improvement is helping home automation sector to grow rapidly. In many Countries many medical patients ...
  • FABRICATION OF LOW ENERGY CONSUMING FAN 
    Rasool, Owais Reg # 19315; Jamil, Waris Reg 19352; Shamim, Syed Usaid Reg # 19342; Khan, Saad Ali Reg # 19322 (Bahria University Karachi Campus, 2013)
    We are making a low energy consuming fan via optical sensor remote control with backup Battery charger, the purpose of making energy saving fan is to reduce the power. Now the Question arises is that how we reduce the ...
  • Electronic Multi-Gas Detection System 
    Waris, Ayesha Reg # 22827; Laghari, Zainab Reg # 22919; Sherafal, Aisha Reg # 22814 (Bahria University Karachi Campus, 2014-08)
    As industries are growing bigger and bigger day by day, the safety of its employees and machines are also a big concern of the authorities. Gas leakage can cause explosions which can have devastating consequences. So it ...
  • GPS Based Autonomous Vechile 
    Shakeel, Ahsan Reg # 22813; Aijaz, Muneeb Reg # 22880; Rabbani, Atif Reg # 22826 (Bahria University Karachi Campus, 2014-09)
    The project includes the construction and design of a self-navigating vehicle capable of navigating a course of several positions of latitude and longitude referred to in the report as a waypoint. A wireless connection ...
  • REMOTE SENSING OF PHYSICAL PARAMETERS 
    Masood, Muhammad Ali Reg # 19279; Saeed, Muhammad Qamar Reg # 19288; Baig, Muhammad Ghufran Reg # 19254 (Bahria University Karachi Campus, 2013)
    The objective of this project is to acquire data with time from different sensors from remote location and transmit them through serial link and plot them on GUI in real time. This project consists of three phases which ...
  • MPPT CHARGE CONTROLLER 
    Ur Rehman, Asad Reg # 19243; Umar, Muhammad Reg # 19295; Raza, Muhammad Wasim Reg # 19300 (Bahria University Karachi Campus, 2013)
    Solar energy is one of most reliable and sustainable source of renewable energy and very popular nowadays but problem with solar energy is there efficiency as they are highly dependent on temperature and environmental ...
  • DESIGN AND FABRICATION OF A SELF BALANCING PERSONNEL VEHICLE 
    Iqbal, Junaid Reg 25377; Sohail, M. Zohaib Reg # 25444; Naim, Asad Reg # 25343 (Bahria University Karachi Campus, 2014-08)
    We all know that world is facing problems like environmental pollution, energy crisis as well as many other local problems such as traffic jams etc. So a vehicle which can overcome all these problems with good efficiency ...
  • DESIGN OF SERVO MOTOR BASED ROBOTIC ARM USING FPGA 
    Muhammad, Dur Reg # 19249; Ahmed, Habib Reg # 19255; Aman, Saima Reg # 19325; Shafique, Kiran Rag # 19273 (Bahria University Karachi Campus, 2013)
    Enormous progress in the field FIELD Programmable Gate Array (FPGA) has made it easy to design, simulate and synthesize complex digital world applications with greater performance, low cost, low power consumption and a ...
  • INTELLIGENT CONTROLLER FOR HOUSEHOLD/OFFICE DUAL FUEL GENERATOR 
    Akber, M. Ayaz Reg 22856; Khan, M. Munir Reg # 22864; Hussan, S. Ghufran Reg # 22986 (Bahria University Karachi Campus, 2014-09)
    The project basically focuses on providing comfort to the customers who use dual fuel generators. The project consists of modules that will provide user the option to operate the generator in automatic mode or manual ...
  • DESIGN AND FABRICATION OF UAV DRONE WITH HIGH SPEED IMAGE PROCESSING AND WIDE RANGE CONTROL 
    Waqas, Muhammad Reg # 22875; Mohi ud Din, Muhammad Bin Reg # 22860; Rashid, Saad Reg # 22893 (Bahria University Karachi Campus, 2014-08)
    The military use of unmanned aerial vehicles (UAVs) has grown due to its ability to operate in hazardous locations while retaining their human operators at a safe distance. Larger UAVs also provide a cost-effective, reliable ...
  • Solar Based Water Distribution in Deserted Areas 
    Abbasi, Ali Nawaz Reg # 22816; Akhtar, Shahbaz Reg # 22901; Rajput, Mustafa Iqbal Reg # 22866 (Bahria University Karachi Campus, 2014-09)
    Solar energy is the richest stream of energy that is available directly as solar segregation and has the sources of renewable energy. Its potential is 178 Billion MW, which is about 20,000 times the world’s demand. Sun ...
  • Data Communication via AC Power Lines 
    Khan, Ammar Ali Reg # 22820; Zohaib, Muhammad Reg # 22877; Saleem, Muhammad Asad Reg # 22854 (Bahria University Karachi Campus, 2014-09)
    This report discusses the scope and detailed description of our final year project “Data Transmission via AC Power Lines”. The main objective of the perceived and designed project is to send and receive data through the ...
  • Automation of Bio-gas Plant 
    Ghafoor, Waqar Reg # 22915; Uddin, Zaheer Reg # 22918; Fayyaz, Badar Reg # 22828 (Bahria University Karachi Campus, 2014-09)
    Developing countries are in critical energy crisis. Pakistan spends almost 7 billion US$ on import of fossil Fuels annually to congregate its energy needs. The renewable and sustainable energy resources are best Substitute ...
  • UBIQUITOUS COMPUTING BASED ELECTRICAL AUTOMATED SYSTEM 
    Mukati, M. Rizwan Reg # 22867; Ali, Shujaat Reg # 22904; Akbar, Murtaza Reg # 22882 (Bahria University Karachi Campus, 2014-09)
    The purpose of this report ,s to familiarize our readers with our project, time and struggle that wen mto .t how we divide our work? What problems were encountered initially and in the end, and how did we solved them. ...

Search DSpace


Advanced Search

Browse

My Account