BEE (BUES-FYP): Recent submissions

  • Rafia Imran Khan, 01-133142-113; Muhammad Mahboob ur Rehman, 01-133142-085; Qasim Zaman, 01-133142-112 (Electrical Engineering, Bahria University Engineering School Islamabad, 2018)
    A number of automated home security systems have been developed to avoid intrusions that are increasing at higher rate. These systems include automated finger print scanner or keypad lock but are extremely expensive and ...
  • Hidayat Hussain Mir, 01-133142-049; Muhammad Arslan Nasir, 01-133142-069; Muhammad Arslan Bin Naseer, 01-133142-068 (Electrical Engineering, Bahria University Engineering School Islamabad, 2018)
    Safety is more important than other things. So many established companies mainly focused on safety systems because a person life more precious than all otherthings. As the technology advances, the safety issues increase ...
  • Yasir Ali, 01-133142-158; Saad Hanif, 01-133142-123; Saim Raza Amir, 01-133142-128 (Electrical Engineering, Bahria University Engineering School Islamabad, 2018)
    The final year project report contains information about automatic irrigation using wireless sensor network. This report contains information about introduction, literature review, important aspects and specification of ...
  • Ahsan Ali Tahir, 01-133142-010; Ghulam Fareed, 01-133142-036; Hafiz Muhammad Waqar ul Haq, 01-133142-039 (Electrical Engineering, Bahria University Engineering School Islamabad, 2018)
    An EEG-based home automation system for paralyzed persons is proposed in this report. The EEG innovation can be utilized by incapacitated individuals to enhance their autonomy and amplify their capacities at home. Our ...
  • Zeeshan Zafar, 01-133142-162; Syed Fawad Hussain Naqvi, 1-133142-143; Salahuddin Ayubi, 01-133142-129 (Electrical Engineering, Bahria University Engineering School Islamabad, 2018)
    The architectural appearance, morphology and structural formation of glands contains information that helps in the detection of adenomatous disease. To assist pathologists in the grading of cancer, the segmentation of the ...
  • Muhammad Imran, 01-133142-281; Adnan Shafi, 01-133142-007; Babar Afzal, 01-133142-028 (Electrical Engineering, Bahria University Engineering School Islamabad, 2018)
    This project presents the design and development of the RFID Based Room Automation using microcontroller with NODE MCV ESP8266 WIFI Module. This project is representing the concept of automated door access system, automated ...
  • Shakeel Ahmad, 01-133092-082; Shafiq ur Rehman, 01-133092-080; M. Umair Khan, 01-133092-059 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    The daily life of people encounters more problems as the population continuously increases in urban areas, and road traffic becomes more congested because of high demand of cars and less level of road capacity and ...
  • M. Awwab Zaidi, 01-133092-047 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    Maximum Demand Indicator (MDI) is intended for measuring the maximum mean load. MDI allows the maximum load to be compared with the sanctioned load and this value should be less if the original analysis was performed ...
  • Abdul Basit, 01-133092-001; Muhammad Muzammil, 01-133092-052; Mian Mujtaba Ali, 01-133092-037 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    The basic purpose of our project is to implement GENETIC ALGORITHM on a UGV in a globally static environment for optimal path planning. Different techniques like cross over, mutation and gene pool are used for the ...
  • Muhammad Junaid Shakoor Khan, 01-133092-040; Adnan Mushtaq, 01-133092-006 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    About 25% population in Pakistan is deprived of gridline electric facility. In addition to this there is high power shortage throughout the country especiallyin rural areas. However electricity has become integral part of ...
  • Turab Hussain, 01-133092-058; Qazi Shahabaz R., 01-133092-071; Muhammad Usman Sajid, 01-133092-063 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    The aim of the project was to achieve the underground coal mines traffic control using wireless sensor networks. The main purpose was to provide the scenario where the accidents in underground mines in our case coal mines ...
  • Imran Zahid, 01-133092-029; Sameer Chaudhry, 01-133092-038 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    Rural and remote areas have electricity deficiency. Biomass is abundantly available in rural areas whereas there is scarcity of electricity in these areas. There is commercial technology exist through that electricity can ...
  • Zeeshan Akber, 01-133092-104; Zohaib Akram, 01-133092-106 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    This project is all about controlling a wireless robot using trans-receiver modules. The module we used works on 2.4 GHz frequency which is quite good as it is not disturbed by the magnetic tield due to motors on receiver ...
  • Usman Haroon, 01-133092-096; Farrukh Jamal, 01-133092-023; Usman Liaqat, 01-133092-097 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    In this project, we’ve designed a Maze Solving Transportation Robot that can solve any given maze using efficient algorithms. The basic idea behind choosing this project was the man-driven lifters being used at METRO cash ...
  • Jahangir Alam, 01-133092-031; Haris Irfan Malik, 01-133092-028 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    The aim of this project is to make an intelligent video surveillance system. In today’s world, the security concerns have grown a great deal especially due to worldwide increase in terrorism over the past decade. Monitoring ...
  • Sundas Khan, 01-133092-087; M. Ahmed Zia, 01-133092-044 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    The controlled source electromagnetic sounding method (CSEM) detects and characterizes hydrocarbon-bearing reservoirs buried beneath a conductive sea bed by the use of electromagnetic energy. This method has emerged as a ...
  • Murtaza Hassan, 01-133092-066; Zeeshan Aziz, 01-133092-105; Saad Bin Abi Waqas, 01-133092-206 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    Pakistan, the country we live in, is a country where the demand for any particular thing is way greater that the accommodations we have for it. We have a consumption-oriented society. We find ways to get more stuff into ...
  • Muhammad Nauman, 01-133092-053; Naila, 01-133092-067; Zeeshan Haider, 01-133092-224 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    Robotic Librarian is an application based autonomous Robot. The Robot as we call it Robotic Librarian can do all kind of tasks, what a librarian has to do. We have used some traditional techniques like Relay H-bridges for ...
  • Mohammad Waqas, 01-133092-039 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    The purpose of the project is to build an autonomous UGV(Unmanned Ground Vehicle) which would serve the purpose of video surveillance. Along with that, it will also aid in avoiding obstacles that would come in its path. ...
  • Uzair Munir, 01-133092-098; Bilal Ahmed, 01-133092-178; M. Usman Ashraf, 01-133092-061 (Electrical Engineering, Bahria University Engineering School Islamabad, 2013)
    Parabolic dish concentrate solar energy at a single focal point .Reflector sheet is used to concentrate sunlight on the dish. Stirling engine is placed at the focal point of the dish, which absorbs the reflected heat of ...

Search DSpace


Advanced Search

Browse

My Account