Department of Electrical Engineering (BUES): Recent submissions

  • RFID based library management system (P-0208) (MFN 2813) 
    Saqib Majid; Ubaid Ur Rehman; Arsalan Khan (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    Our goal is to design a fuel dispenser based on industrial controlling computer; adopt advanced computer technology, together with high precision meter. It’s a measuring device for filling fuel for cars in petroleum station. ...
  • Microcontroller based digital automated fuel dispenser (P-0209) (MFN 2814) 
    Muhammad Mohsin Anjum; Usman Shahzad Ranjha; Qasim Fareed Shad (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    Our goal is to design a fuel dispenser based on industrial controlling computer; adopt advanced computer technology, together with high precision meter. It’s a measuring device for filling fuel for cars in petroleum station. ...
  • X band Low Noise Amplifier and Ultra Broad Band Wilkinson Power Divider (P-0210) (MFN 2815) 
    Tahir Imran; Waseem Ahmed, 01-133072-070; Tanveer Zahid (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    Our final year Project is divided into two parts: X Band Low Noise Amplifier and 2GHz- 18GHz Broadband Wilkinson power divider. In Microwave communication the first stage of each microwave receiver has Low Noise Amplifier ...
  • Autonomous Unmanned Ground Vehicle for Landmines Detection (P-0197) (MFN 2816) 
    Muhammad Zahid Khan, 01-133072-133 (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    The goal of project is to design an unmanned ground vehicle (UGV) that can navigate and adapt to its surroundings. Unmanned vehicles will have many important roles in the upcoming future. The importance of these vehicles ...
  • GSM based emergency vehicle traffic control system (P-0198) (MFN 2817) 
    Hassam Shoaib; Muhammad Miqdad Ali; Saqlain Yaseen (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    Abstract The emergency vehicle movement has always been a serious issue in traffic control management. As if an ambulance is on the move it may face traffic congestions on the roads, especially on the signals. To allow ...
  • Wi-Fi enabled unmanned ground vehicle (P-0199) (MFN 2818) 
    Muntaha Saleem, 01-133072-044 (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    The continuous danger for the soldiers can be decreased; if instead of humans surveillance can be done by robots. The “Wi-Fi Enabled Unmanned Ground Vehicle” is able to provide this option to soldiers. The user can control ...
  • Wi-Max Based Surveillance UGV (P-0200) (MFN 2819) 
    M. Hassan Ahmad Roshan; Zahid Ali Shah; Syed Haseeb Hasan Hamdani (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    The purpose of the project is to make such a robot, which can be controlled through a website and provide high-speed video stream for surveillance purpose. The applications of this project are unlimited. Along with ...
  • Motion detecting camera (wireless) (P-0201) (MFN 2820) 
    Muhammad Asim Zahid; Muhammad Ali; Muddassar Ali Sheikh (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    The usual security cameras have a number of blind spots which enables intruders to bypass them without being detected. This security camera is designed to remove this flaw. The basic idea is to use Ultrasonic to detect any ...
  • Design and Implementation of a UAV using GPS (P-0202) (MFN 2821) 
    Mohammad Mahad Shams; Junaid Abbas; Babrik Changez Khan; Farhan Riaz (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    This project ‘Design and Implementation of a UAV using GPS’ involves building of UAV with distinct features. The UAV is built with the help of a ‘Do it yourself’ (DIY) kit based on the design taken from MIT research paper. ...
  • Vision based automation system application (human language translator) (P-0203) (MFN 2822) 
    Haroon Yaseen (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    This undergraduate dissertation describes the implementation of “Vision Based Automation System Application (Real Time Human Language Translator)”. My goal was to develop a system of human computer interaction which is ...
  • Design of RFID and security system (P-0262) (MFN 2823) 
    Abdul Wahid; Muhammad Abid Khan; Muhammad Usman (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    Radio Frequency Identification (RFID) is a rising technology in the world nowadays. Many systems have already introduced and many systems are planned and will hopefully be implemented. RF applications, such as television, ...
  • Brain computer interface (P-0206) (MFN 2811) 
    Wajeeh Muhammad; Waleed Manzoor; Uzair Ahmed (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    Brain Computer Interface is a direct way for humans to communicate with a computer or any external device using only their thoughts. There are 3 ways to achieve this. Two of these are invasive, are dangerous to perform and ...
  • Autonomous Line Tracking and Colour Sensing Robot (NERC-2011) (P-0205) (MFN 2810) 
    Waseem Ilyas; Khalil Ahmed; Farhan Aslam (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    The project comprises of designing an autonomous robot that follows the outlines given by the National Engineering and Robotics Contest (NERC) that is organized by the department of Mechatronics Engineering, at the College ...
  • Modeling and simulation of Wi-Fi network in XC campus Bahria University using OPNET (P-0204) (MFN 2809) 
    Jahanzeb Sarwar Malik; Arslan Musaddiq; Asad Irfan (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    We will use OPNET to simulate the Wi-Fi network of Bahria University’s XC Campus .OPNET is a simulation software tool with rich set of libraries to model, configure and simulate the entire heterogeneous network. Wireless ...
  • Vending machine (design and development of a pre paid vending machine) (P-0196) (MFN 2824) 
    Bilal Khalid; Hafiz Imran Nadeem (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    The project Vending machine is actually upgraded form of ATM machine which provides a connection between a vendor and a customer at commercial level. Similarly, the vending machine will provide different products of different ...
  • Wifi Based E-Shopping (P-0195) (MFN 2825) 
    Ali Tasaram; Babar Khan; M. Bilal Abassi (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    This project’s main idea involves mobile shoppers with personal digital assistants (PDA) interacting with store services while in the mall, on the way to the store, or in the store itself. Mall-wide services, such as ...
  • Industrial Power Factor Correction (P-0194) (MFN 2826) 
    Tariq Ajmal; Rashid Aleem (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    The main idea behind the project was to design and implement a real time power factor monitoring and correction system. Power factor calculation can be done by measuring the lead/lag angle between the voltage and the current ...
  • I-Robot (P-0193) (MFN 2827) 
    Aeman Ibrar; Shahzada M Shahrukh; Tayyaba Qaiser Qurashi; Zeeshan Asghar (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    Our project is the construction of an autonomous line tracking and color sensing robot, with the added enhancement of a voice module for wirelessly controlling the robot. The autonomous robot is capable of tracking white ...
  • Design and implementation of a control system for de-mineralized water plant (P-0192) (MFN 2828) 
    Rana Ali Arslan; Faheem Khalid (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    Design & Implementation of a Demineralized Water Plant,as the name indicates,is a fully automated plant which continuously monitors and maintains the pH of water at a certain value.The main purpose and theme of doing this ...
  • Voice Enabled Automation System (P-0191) (MFN 2829) 
    Awais Malik, 01-133072-091; Mehtab Bashir, Mehtab Bashir; Momena Malik (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    The aim of the project is to design a voice enabled home automation system. The general idea behind this project is that whenever a voice command is given to the system, then the system should understand the command and ...

Search DSpace


Advanced Search

Browse

My Account