Final Year Project Report (BUES): Recent submissions

  • 2D Seismic Interpretation and Petro physical Analysis of FIM Kasar Area, Upper Indus Basin, Pakistan 
    Amna Khan; Sadia Sheikh (Earth and Environmental Sciences, Bahria University Engineering School Islamabad, 2025)
    In the eastern part of the Potwar Sub-basin lies the Fim Kassar area, which is a leading structural division of the Upper Indus Basin of Pakistan.The Potwar Basin is a hydrocarbon-producing area. Because of compressional ...
  • 2D Seismic Data Interpretation and Petrophysical Analysis of Layyah Area, Central Indus Basin, Pakistan 
    Muhammad Umer; Hamza Naseer (Earth and Environmental Sciences, Bahria University Engineering School Islamabad, 2025)
    In this study, our objective was to elucidate the subsurface geology of the Kamiyab area using advanced seismic interpretation techniques and petrophysical methods to estimate hydrocarbon saturation and evaluate reserves. ...
  • Assessment Of Physical, Chemical, and Biological Parameters of Drinking Water Quality in Thorar Khas, Azad Kashmir 
    Maryam Sudozai; Sadia Naseem Abbasi (Earth and Environmental Sciences, Bahria University Engineering School Islamabad, 2025)
    In Pakistan, poor water quality is the main issue affecting both the environment and public health. Both groundwater and surface water including the spring water in the country have been polluted with many toxic substances, ...
  • Spatial And Temporal Variations in Air Quality in Islamabad Using Sentinel 5-P Tropomi Data 
    Rimsha Mushtaq; Amna Malik (Earth and Environmental Sciences, Bahria University Engineering School Islamabad, 2025)
    The study examines spatial and temporal variations on the seasonal scale for the variability of four primary atmospheric pollutants, Nitrogen Dioxide (NO2), Carbon Monoxide (CO), Sulfur Dioxide (SO2), Methane (CH4), and ...
  • Enhancing Green University Practices Through Effective Plastic Waste Management Strategies 
    Sayed Yasir Hussain Shah; Tayyab Islam (Earth and Environmental Sciences, Bahria University Engineering School Islamabad, 2025)
    Plastic pollution has emerged as a major environmental and public health concern, particularly in the institutional settings where single-use plastics are frequently consumed and improperly discarded. This study investigates ...
  • Subsurface Structural Interpretation and Petrophysical Analysis of Bitrism Area, Southern Indus Basin, Pakistan 
    M. Daniyal Qureshi; Momin Javeed (Earth and Environmental Sciences, Bahria University Engineering School Islamabad, 2025)
    This study presents a comprehensive geophysical and petrophysical investigation of the Bitrism area located within the Lower Indus Basin, with a primary focus on hydrocarbon exploration. The seismic interpretation involved ...
  • 2D Seismic Data Interpretation and Petrophysical Analysis of Kadanwari Block, Lower Indus Basin, Pakistan 
    Zeerak Abbas, 01-166212-024; Muhammad Haris, 01-166212-014 (Earth and Environmental Sciences, Bahria University Engineering School Islamabad, 2025)
    The thesis was conducted to observe and understand the subsurface geology of the Kadanwari area by utilizing 2D seismic interpretation and the hydrocarbon saturation was estimated utilizing petrophysical formulae. The study ...
  • Geospatial Assessment of Glof Hazards at Badswat Lake, Gilgit-Baltistan, Pakistan 
    Muhammad Umar; Muhammad Nouman Abid (Earth and Environmental Sciences, Bahria University Engineering School Islamabad, 2025)
    The Glacial Lake Outburst Floods poses threat to high mountain regions in Gilgit-Baltistan, Pakistan. Climate-induced glacier retreat is accelerating the formation and expansion of glacial lakes. This study presents a ...
  • Evaluation of Antimicrobial Activity of Zinc Oxide Nanoparticles in Animal farm Wastewater 
    Aatikah Zulfiqar; Tehreem Asif (Earth and Environmental Sciences, Bahria University Engineering School Islamabad, 2025)
    This study evaluates the antimicrobial activity of zinc oxide (ZnO) nanoparticles against resistant microbial populations in the animal farm wastewater source. ZnO nanoparticles were synthesized via a chemical precipitation ...
  • Assessing Sea Water Intrusion and Its Impacts on Crop Land and Forest Cover Using Geo Spatial Techniques in District Thatta, Sujawal and Badin (Sindh) 
    Sunaina Dawood; Alina Ehsan (Earth and Environmental Sciences, Bahria University Engineering School Islamabad, 2025)
    Seawater intrusion is one of the destructive environmental issues of Pakistan affecting the Sindh coastal districts in particularly Thatta, Sujawal and Badin. In this study, geographic information techniques are applied ...
  • Volunnet 
    Ali Arshad, 01-131202-006 (Software Engineering, Bahria University Engineering School Islamabad, 2025)
    VolunNet is designed to address the problem of connecting Volunteers with organizations for suitable Volunteering Opportunities. Individuals that want to do the volunteering work but do not know how to find the work. They ...
  • Design and Control of Lower Limb Exoskeleton System 
    Muhammad Hashim Raza, 01-133212-070; Muhammad Mubashir Raza, 01-133212-078; Waleed Bin Khalid, 01-133212-142 (Electrical Engineering, Bahria University Engineering School Islamabad, 2025)
    Manual handling tasks, such as lifting, carrying, and stacking loads ranging from 10 to 25 kg, are integral to industries including warehousing, construction, and logistics, placing substantial physical demands on workers ...
  • Development of System For Underwater Point to Point Encrypted Optical Wireless Communication 
    Muhammad Haseeb ur Rehman, 01-133212-069; Muhammad Zeeshan Usman, 01-133212-097; Faseeh Afridi, 01-133212-027 (Electrical Engineering, Bahria University Engineering School Islamabad, 2025)
    Underwater communication is a key technological challenge because of the accompanying restrictions with the use of traditional radio-frequency systems that experience signal attenuation as well as interference in the aquatic ...
  • Design and Development of Compact Size Power Amplifiers PCB Using Discrete Components for Obstacle Avoidance Sonar 
    Muhammad Zohaib, 01-133212-098; Samamah Nazish, 01-133212-119; Muhammad Ibtisam Naveed, 01-133212-155 (Electrical Engineering, Bahria University Engineering School Islamabad, 2025)
    Our project revolves around using an operational amplifier—primarily for signal amplification or conditioning. At the core of our design is the PA96, a high-voltage precision op-amp, which is part of a feedback network ...
  • Smart Inventory Management System for SMES 
    Muhammad Usama, 01-133212-093; Munahil Amin, 01-133212-100; Muhammad Idrees Ahmad, 01-133212-073 (Electrical Engineering, Bahria University Engineering School Islamabad, 2025)
    This project is an innovative approach to developing a Smart Inventory Management System. It is specifically designed for small and medium enterprises (SMEs). SMEs face numerous challenges in inventory management, many of ...
  • Real-Time 3D Mapping in Complex Environments for Visually Impaired People 
    Syeda Sara Raza, 01-133212-134; Maryam Ali, 01-133212-045; Mamoona Ahmed, 01-133212-159 (Electrical Engineering, Bahria University Engineering School Islamabad, 2025)
    In today’s age and time, there are many technologies designed to help humans deal with any kind of disability that they might be facing. Out of many disabilities, the one that usually stands out the most is vision. Vision ...
  • AI Based Implementation for Real Time Detection of Distortion in Images 
    Muhammad Haider Sultan, 01-133212-066; Muhammad Hamza, 01-133212-049 (Electrical Engineering, Bahria University Engineering School Islamabad, 2025)
    The image pixels are severely distorted which is then caused by environmental conditions, compression techniques, and hardware restrictions. This results in poor quality images which affect several disciplines such as medical ...
  • Development of Remote Controlled Under Water Vehicle for Inspection of Hull and UW Fittings 
    Hannan Rasool, 01-133212-032; Talha Shah, 01-133212-136; M. Hassan Azhar, 01-133212-071 (Electrical Engineering, Bahria University Engineering School Islamabad, 2025)
    Here, you will find details on how to model, design, and control an Autonomous Underwater ROV used for inspection and exploration. In contrast to the common ROVs, which need human operators, this system is created for ...
  • Smart Bandage with Energy Harvesting for Wound Healing 
    Zunurain Ahmed Janjua, 01-133212-161; Laiba Ayaz, 01-133212-042; Mufliha Aslam, 01-133212-053 (Electrical Engineering, Bahria University Engineering School Islamabad, 2025)
    The integrated energy harvesting technologies within a smart bandage mark a transformative leap in the management of chronic wounds. Often, chronic wounds like diabetic ulcers and pressure sores require ongoing treatment ...
  • Multi-Stage Industrial Robot for Transportation 
    Mohsin Akhlaq, 01-133212-051; Muhammad Abdullah, 01-133212-056; Muhammad Saad, 01-133212-081 (Electrical Engineering, Bahria University Engineering School Islamabad, 2025)
    Automation in warehouse material handling increases efficiency, reduces costs, and improves safety. The traditional method of manual handling is slow, labor-intensive, and error-prone. In this thesis, we discuss an Autonomous ...

Search DSpace


Advanced Search

Browse

My Account