Final Year Project Report (BUES): Recent submissions

  • Autopilot Navigation System (P-0164) (MFN 3189) 
    Ali Aqdas, 01-133082-209,; Syed Basharat Hussain Shah, 01-133082-105 (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    Autopilot enables an airplane to fly autonomously. This project is an inspiration from UAV drone. The project has two phases. One phase is for construction of airplane and second phase of development of autopilot system ...
  • GSM based Car automation and security (P-0163) (MFN 3190) 
    Faiz ur Rehman, 01-133072-099 (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    The motivation behind GSM based car automation is extreme temperature conditions and unsecure environment. This system provides two functionalities i.e. automation and security. The automation part of the system deals ...
  • Smart digital energy meter (P-01620) (MFN 3191) 
    Hafiz M. Ahmed; Soman Aksar; Ahmed Shahid (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    The project is entitled to replace conventional energy meters with digital meters. Digital Meters are more accurate and can be enhanced according to technology up gradations. The technological up gradations enhance ...
  • Concentrated Solar Cell Power Generation (P-0161) (MFN 3192) 
    M. Rahaman Azam; Umar Riaz; Syed Atif Rafiq Shah (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    The Concentrated Solar Cell Power Generation is a mechanism which enables the user to enhance the efficiency of a solar panel. By using reflective mirrors, we have enhanced the efficiency of the solar panels by allowing ...
  • Finding Radar Cross Section of an object and reducing it (P-0160) (MFN 3193) 
    Syed Osama Hassan; Mubashir Saeed (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    Radar Cross Section of an object is the measure of its size seen by a radar and is expressed as m2. RCS depends upon the relative size of the object. An object is modeled in 2D system using different materials and then its ...
  • Electronic Voting Machine (P-0159) (MFN 3194) 
    Muhammad Kamran; Maaz Ajab (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    Electronic voting machine is created which is integrated with Visual Studio 6 software using with finger print recognition. The fingerprint bio-metric machine uses image processing for voter identification. After completing ...
  • Accelerometer Glove as an Input Device for Personal Computers (P-0158) (MFN 3195) 
    Fahad Tariq; M. Rashid Sultan; Anam Nishat Satti (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    This project presents the implementation of new hardware for human computer interface (HCI) i.e. mouse and keyboard. We implemented mouse and keyboard in air with the help of accelerometer ADXL 335. The method performs ...
  • Three Phase Automatic Generator Interface with GSM (P-0157) (MFN 3196) 
    Zahid Habib Satti; Mubasher Irfan Abbasi (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    In this fast and advance world many inventions on daily base. As the world is getting busier the demand of the automated system is also increasing as well. It is not possible to promote development in our country with ...
  • 8-Bit 8051 Microcontroller Design Using FPGA (P-0156) (MFN 3197) 
    Kaynat Zia; Ahsan Ikram; Asim Altaf Shah (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    The project is to design and implement 8-bit 8051 Microcontroller using FPGA. The design parameter includes ALU (Arithmetic Logic Unit), Memories, Instruction register (IR) and Program counter (PC) and control Finite State ...
  • Automatic Solar Radiation Tracker (P-0155) (MFN 3198) 
    Hammad Tila Khan; Usman Khan (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    Solar panels work up to the mark when maximum sunlight falls on the panel so that photons from sunlight knock electrons into a higher state of energy. To achieve this, solar panel is continuously tracking the direction ...
  • Design and implementation of OFDM transceiver on FPGA (P-0154) (MFN 3199) 
    Moiz Ahmed (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    With the technological advances in smart phones and laptops, higher data rates have become a necessity of the present wireless digital communication systems. Orthogonal Frequency Division Multiplexing (OFDM) is a very ...
  • Speed Control of Three Phase AC Induction Motor (P-0153) (MFN 3200) 
    Asjad Ali; Asim Ali (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    In today’s industrial world three phase AC induction motor is considered to be the leading horse of the industry, many applications require variable speed and torque implementation. Applications that are driven by three ...
  • Electricity generation through waste water (P-0152) (MFN 3201) 
    Faisal Ayub; Afshan Salim; Muhammad Umar (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    World is facing severe energy crisis, the most excellent way to overcome the energy crisis is using renewable energy resources. Thousands of gallon of water have been wasted through our sewage system, if we use that water ...
  • Distributed Control System (P-0151) (MFN 3202) 
    Atif Mehmood; Farrukh Anwar; Muhammad Usman (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    From the very beginning of industrial revolution, efforts are being made for a safe, efficient and modern control system. Distributed Control System (DCS) is one of control systems which control the parameters of the ...
  • Electric Bicycle (P-0150) (MFN 3203) 
    Humera Khalid; Asadullah Khan (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    Ambition of this report is to bestow the description of cognitive operation of planning, designing and testing an Electric bicycle that makes common people independent of expensive fuels, fuel shortage that have been a ...
  • Dissemination of hydrogen energy in Mobile charging (P-0149) (MFN 3204) 
    Muhammad Talha Ejaz; Muhammad Junaid Siddique; Muhammad Abdullah Badar (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    Hydrogen fuelled electricity generation is an emerging option to encounter the contemporary requirement of electricity. European Union parliament has passed a law that the transport system has to be transformed on to ...
  • Intelligent Cash Deposit System (P-0148) (MFN 3205) 
    Abdul Mannan Khan; Umair Ahmed; Faisal Ilyas (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    Self-service has undoubtedly helped banks stand out from the competition, by diverting routine tasks from employees so they can concentrate on serving customers. Banks in Pakistan mostly provide cash withdrawal services ...
  • Ultrasonic collision avoidance system for vehicles (P-0147) (MFN 3206) 
    Syed Qaiser Hussain (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    It is a common observation that smokes, fog or the negligence of drivers results in road accidents. I have a designed a system that is efficient enough to sense any obstacle, the motion of the car which is coming in front ...
  • Rescue Robotic Boat (P-0146) (MFN 3207) 
    Mansoor Khan; Rustam Khan; Sayed Qasim Shah (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    The main purpose of this project is to save water-based victims/objects. There are two methods to save water-based victims/objects i.e. through helicopters/sea planes or through boats. Air-borne vehicle is too expensive ...
  • Prosthetic bionic arm using EMG (P-0145) (MFN 3208) 
    Ch. Umair Amjad; Sheryar Ali (Electrical Engineering, Bahria University Engineering School Islamabad, 2012)
    EMG mechanism is essential for efficient recording and analyzing the muscles activity, so the issue is addressed by implementing it in the field of autonomous prosthetic limbs. EMG based robotic arm is constructed and ...

Search DSpace


Advanced Search

Browse

My Account